MELT 1500 – fine powder adhesive

MELT 1500 – fine powder adhesive

MELTING POWDER 1500, 1kg.

The adhesive for transfers MELT 1500 is a high-quality powder adhesive with fine particles, providing excellent adhesion to various materials.

For the production of professional transfers, it is crucial to use high-performance powder adhesives, selected according to the specific purposes and technical needs of the final product. We recommend using this adhesive for the production of transfers with Avantex plastisol inks or Avantex 112 and some bases that are water or solvent-based.

Apply MELT 1500 after the final phase of printing the transfer, onto the still fresh ink, and cure it in the drying tunnel for 1-3 minutes at 140°C.

Conditions for transferring the print onto the material:

T: 160-170°C

Time: 10-20 seconds

Transfers with added MELT 1500 adhesive are resistant to washing up to 40°C and dry cleaning. Instead of sprinkling the adhesive onto the freshly printed ink, you can mix it into the ink, but do so carefully, as exceeding 10-20% can make the ink no longer creamy, becoming hard and unusable for printing.

TIP:

When the design consists of thicker and thinner parts (smaller fills and fine details), you can combine MELT 1500 powder and MELT 195 (in a ratio of 50:50). The composition of both is completely the same; they only differ in the particle size.